Home News Company news

Company news

How to adjust the bicycle spokes and how to install them
Data:2017-06-21    Source: Qingjin Vehicle Spoke Co., Ltd.     Pv:

First, we need a spoke wrench. The spokes net is the most common one three net, each one of the spokes and the other three spokes each cross at a time. A rib is arranged between the spoke and the spoke cap, and the spoke cap is rotated with a spoke wrench, so that the spoke elasticity can be adjusted. But before adjusting the spokes, the tires must be deflated. Otherwise, the rotating spoke cap can easily pierce the inner tube. The adjustment is in order to maintain the tightness of the spoke Zhou Zheng. You can use the following 3 ways to observe the rim of Zhou Zheng:

1. Remove the wheel and fit it on the special school ring rack. 2, do not remove the wheel, one hand to hold the fork, thumbs up near the medial rim. The gap between the 3, and the observation on the brake.

Either way, the principle is:

Turning the wheel rim from the reference space, is here to tighten spokes, and loose spokes rim; somewhere toward the left, right, left loose tighten spokes spokes. Instead, close left and loose on the right.

Finally the rim around the gap between the reference object is completely uniform, and each spoke tension is uniform, the school bus circle is complete. In order to keep the Zhou Zheng, need to adjust the tightness of the spokes. A spoke wrench, shaped like a circle, with 4-6 different sizes of bayonet, suitable for spokes of different sizes. There is a hole in one end of a spoke is a 90 degree angle through the car smoke, the other end cap through the spokes of the spoke hole. The spokes net is the most common one three net, each one of the spokes and the other three spokes each cross at a time. A rib is arranged between the spoke and the spoke cap, and the spoke cap is rotated with a spoke wrench, so that the spoke elasticity can be adjusted.

Product inquire

Tel: +86-534-3862767
Fax: +86-534-3862867
E-mail: tjgcjxpj@alibaba.com.cn
Add: Changsheng Industrial Zone, Qingyun
County, Shandong Province,P.R.China

Copyright © 2017 Shandong Qingyun Qingjin Vehicle Spoke Co., Ltd.All Right Reserved